3Com 3CRWE454G75
Jump to navigation
Jump to search
3Com 3CRWE454G75
Manuf (OEM/ODM): Gemtek WAPA-139G
FCC approval date: 31 March 2006
Country of manuf.: China, Taiwan
Type: access point
FCC ID: O9C-WL524
IC ID: 2299L-WL524
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Atheros AR2316A
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (STMicroelectronics 25P16V6P)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (ISSI IS42S16400B-7TL)
Expansion IFs: none specified
Serial: yes, internal, 9-pin header, unpopulated, 3.3V TTL, Gemtek type1 pinout, (9600,8,N,1), JP1
WI1 chip1: Atheros AR2316A
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA
ETH chip1: Atheros AR2316A
ETH chip2: IC+ IP101
LAN speed: 100M
LAN ports: 1
bg
Stock FW OS: VxWorks
Default SSID: 3Com (11 addl. devices)
Default IP address: 192.168.1.250
the IP 192.168.1.250 is used by 25 additional devices
of which 0 are 3Com devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 12 are 3Com devices
802dot11 OUI: 00:1A:C1 (1 E, 1 W), 00:1E:C1 (-, 2 W)
Ethernet OUI: 00:1A:C1 (1 E, 1 W), 00:1E:C1 (-, 2 W)
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
'''3Com OfficeConnect Wireless 54Mbps11g Access Point
(WL-524)
"WAPA-139G"(...) and "190-C03-06"(...) is silkscreened on a production model board.
- The Wi-Fi radio is using a Microchip (SST) SST12LP14 power amplifier and an NEC UPG2035 / UPG2035T5F (??) DPDT switch.
The power adapter included with the device appears to be a 3Com branded 3C12VUS.. which is a DVE DSA-15P-12 US 120120 (100-240VAC ~ 50/60Hz, 0.5A -> 12VDC, 1A).
Serial
Pinout
Credentials
The default login is admin:admin.
Info derived from
| • boot log |
|---|
ar531xPlus rev 0x00000087 firmware startup... Atheros AR5001AP default version 4.0.0.167 0 auto-booting... Attaching to TFFS... done. Loading /fl/APIMG1...1212368 Starting at 0x804846e0... /fl/ - Volume is OK Reading Configuration File "/fl/apcfg". wl1_root_ap_mac=00:00:00:00:00:00 wl1_root_ap_mac=00:00:00:00:00:00 Configuration file checksum: 5f382 is good wl1_root_ap_mac=00:00:00:00:00:00 Attaching interface lo0...done vp0 macaddr = 00:1a:c1:36:bf:03 ae0 macaddr = 00:1a:c1:36:bf:02 ser=9TDR8QK36BF02 start easyconf 08022006 wireless access point starting... channel 2462 wlan0 Ready Ready RegDmn = 16 wl_param_t_SW.wan_ip is 10.203.102.132 easyconf: a channel is easyconf: g channel is 11 easyconf: a channel is 0 easyconf: g channel is 11 easyconf: G no security easyconf: Fail to SetSockopt IP_MULTICAST_LOOP easyconf: Fail to SetSockopt IP_MULTICAST_TTL easyconf: enter while(1)dhcpcBind |
get hardware
AP11G wlan[0,0] -> get hardware wlan0 revisions: mac 11.0 phy 4.8 analog 7.0 PCI Vendor ID: 0x168c, Device ID: 0x13 Sub Vendor ID: 0x168c, Sub Device ID: 0x13 chip is AR5315
version
AP11G wlan[0,0] -> version AP software 4.1.4.19 MeiMei@BEST:E:/4.1.4.19/THGstubs/src/ap/os/vxworks/target/proj/ap-ar5315-production Dec 29 2006, 11:56:16
other
| • Atheros AP shell help |
|---|
AP11G wlan[0,0] -> ? List of Access Point CLI commands: add remoteWbr -- Add a remote Wireless Bridge config wlan -- config wlanX config virtualap -- config virtual ap config bss -- config bss connect bss -- connect to bssX del acl -- Delete Access Control List del key -- Delete Encryption key del remoteWbr -- Delete a remote Wireless Bridge find bss -- Find BSS find bssPassive -- Find BSS with passive scans find channel -- Find Available Channel find all -- Find All BSS ftp -- Software update via FTP get 11gonly -- Display 11g Only Allowed get 11goptimize -- Display 11g Optimization Level get 11goverlapbss -- Display Overlapping BSS Protection get acl -- Display Access Control List get aging -- Display Aging Interval get antenna -- Display Antenna Diversity get association -- Display Association Table get authentication -- Display Authentication Type get autochannelselect -- Display Auto Channel Select get beaconinterval -- Display Beacon Interval get burstSeqThreshold -- Display Max Number of frames in a Burst get burstTime -- Display Burst Time get channel -- Display Radio Channel get cipher -- Display Encryption cipher get config -- Display Current AP Configuration get countrycode -- Display Country Code get ctsmode -- Display CTS mode get ctsrate -- Display CTS rate get ctstype -- Display CTS type get domainsuffix -- Display Domain Name Server suffix get dtim -- Display Data Beacon Rate (DTIM) get encryption -- Display Encryption Mode get extendedchanmode -- Display Extended Channel Mode get fragmentthreshold -- Display Fragment Threshold get frequency -- Display Radio Frequency (MHz) get gateway -- Display Gateway IP Address get groupkeyupdate -- Display Group Key Update Interval (in Seconds) get hardware -- Display Hardware Revisions get hostipaddr -- Display Host IP Address get interVF -- Display Inter Vap Forwarding State get intraVF -- Display Intra Vap Forwarding State get ipaddr -- Display IP Address get ipmask -- Display IP Subnet Mask get jsw -- Display Jumpstart Mode get jsP2PassPhrase -- Display JS-P2 passphrase get key -- Display Encryption Key get keyentrymethod -- Display Encyrption Key Entry Method get keysource -- Display Source Of Encryption Keys get login -- Display Login User Name get minimumrate -- Display Minimum Rate get nameaddr -- Display IP address of name server get operationMode -- Display Operation Mode get pktLogEnable -- Display Packet Logging Mode get power -- Display Transmit Power Setting get pvid -- Display the VLAN Tag get radiusname -- Display RADIUS server name or IP address get radiusport -- Display RADIUS port number get rate -- Display Data Rate get reg -- Display the register contents at the given offset get remoteAp -- Display Remote Ap's Mac Address get remoteWbr -- Display configured Remote Wireless bridges get rogueAPDetect -- Display Rogue AP Detection Mode get rtsthreshold -- Display RTS/CTS Threshold get shortpreamble -- Display Short Preamble Usage get shortslottime -- Display Short Slot Time Usage get sntpserver -- Display SNTP/NTP Server IP Address get ssid -- Display Service Set ID get ssidsuppress -- Display SSID Suppress Mode get active -- Display Active (up) Mode get station -- Display Station Status get SuperG -- Display SuperG Feature Status get systemname -- Display Access Point System Name get telnet -- Display Telnet Mode get timeout -- Display Telnet Timeout get tzone -- Display Time Zone Setting get upsd -- Display UPSD Mode get uptime -- Display UpTime get vaps -- Display Number of Virtual APs get vlan -- Display VLAN Operational State get wirelessmode -- Display Wireless LAN Mode get wmm -- Display WMM Mode get wmmParamBss -- Display WMM parameters used by STA in this BSS get wmmParam -- Display WMM parameters used by this AP get usrp -- Display the User Priority get wlanstate -- Display wlan state help -- Display CLI Command List ping -- Ping pktLog -- Packet Log reboot -- Reboot Access Point run -- Run command file quit -- Logoff set 11gonly -- Set 11g Only Allowed set 11goptimize -- Set 11g Optimization Level set 11goverlapbss -- Set Overlapping BSS Protection set acl -- Set Access Control List set aging -- Set Aging Interval set antenna -- Set Antenna set authentication -- Set Authentication Type set autochannelselect -- Set Auto Channel Selection set beaconinterval -- Modify Beacon Interval set burstSeqThreshold -- Set Max Number of frames in a Burst set burstTime -- Set Burst Time set channel -- Set Radio Channel set cipher -- Set Cipher set countrycode -- Set Country Code set ctsmode -- Set CTS Mode set ctsrate -- Set CTS Rate set ctstype -- Set CTS Type set domainsuffix -- Set Domain Name Server Suffix set dtim -- Set Data Beacon Rate (DTIM) set encryption -- Set Encryption Mode set extendedchanmode -- Set Extended Channel Mode set factorydefault -- Restore to Default Factory Settings set fragmentthreshold -- Set Fragment Threshold set frequency -- Set Radio Frequency (MHz) set gateway -- Set Gateway IP Address set groupkeyupdate -- Set Group Key Update Interval (in Seconds) set hostipaddr -- Set Host IP address set interVF -- Set Inter Vap Forwarding State set intraVF -- Set Intra Vap Forwarding State set ipaddr -- Set IP Address set ipmask -- Set IP Subnet Mask set jsw -- Set Jumpstart Mode set jsp2Passwd -- Set JS-P2 password set key -- Set Encryption Key set keyentrymethod -- Select Encryption Key Entry Method set keysource -- Select Source Of Encryption Keys set login -- Modify Login User Name set minimumrate -- Set Minimum Rate set nameaddress -- Set Name Server IP address set operationMode -- Set operation Mode set password -- Modify Password set passphrase -- Modify Passphrase set pktLogEnable -- Enable Packet Logging set power -- Set Transmit Power set pvid -- Set the VLAN Tag set radiusname -- Set RADIUS name or IP address set radiusport -- Set RADIUS port number set radiussecret -- Set RADIUS shared secret set rate -- Set Data Rate set reg -- Set Register Value set rogueAPDetect -- Set Rogue AP Detection Mode set rtsthreshold -- Set RTS/CTS Threshold set shortpreamble -- Set Short Preamble set shortslottime -- Set Short Slot Time set sntpserver -- Set SNTP/NTP Server IP Address set ssid -- Set Service Set ID set ssidsuppress -- Set SSID Suppress Mode set active -- Set Active (up) Mode set SuperG -- Super G Features set systemname -- Set Access Point System Name set telnet -- Set Telnet Mode set timeout -- Set Telnet Timeout set tzone -- Set Time Zone Setting set vaps -- Set Number of Virtual APs set upsd -- Set UPSD Mode set vlan -- Set VLAN Operational State set wlanstate -- Set wlan state set wirelessmode -- Set Wireless LAN Mode set usrp -- Set the User Priority set wmm -- Set WMM Mode set wmmParamBss -- Set WMM parameters used by STAs in this BSS set wmmParam -- Set WMM parameters used by this AP timeofday -- Display Current Time of Day version -- Software version nvram -- nvram utility |
