Beelink GS1
Beelink GS1 (v2.0)
Manuf (OEM/ODM): AZW
Country of manuf.: China
Type: Android media player
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Allwinner H6 (1.8 GHz, 4 cores)
FLA1: 16 GiB 16,384 MiB <br />17,179,869,184 B <br />134,217,728 Kib <br />16,777,216 KiB <br />131,072 Mib <br /> (Toshiba THGBMBG7D2KBAIL)
RAM1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (SpecTek SM512M32V01MD2LPF-107)
Expansion IFs: USB 3.0, USB 2.0
USB ports: 2
Serial: yes, 3.3V TTL, 4-pin header, unpopulated, (115200 8N1)
WI1 module: Fn-Link 6222B-SRB
WI1 module IF: SDIO/UART
WI1 chip1: Realtek RTL8222BS
WI1 802dot11 protocols: abgn+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: soldered
ETH chip1: Realtek RTL8211E
LAN speed: 1GbE
LAN ports: 1
abgn+ac
Additional chips
PMIC for Multi-Core High Performance System;X-Powers;AXP805;;1;
Stock bootloader: U-Boot 2014.07
Stock FW OS: Linux 3.10.65 Android 7.1
Flags: Bluetooth 4.1 BLE, HDMI 2.0, TF Card slot, SPDIF, IR remote control
Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 207 additional devices
of which 1 are Beelink devices
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
6K TV BOX GS1
"beelink", "GS1" and "Ver:2.0" are silkscreened on top of board.
Specifications
- Beelink GS1 is an Allwinner H6 based TV box, which support:
- - CPU: Allwinner H6 ARM (Cortex-A53) Quad-core 64-bit
- - GPU: Mali-T720
- - 2GB LPDDR3 RAM
- - 1GbE GMAC via RTL8211E
- - Fn-Link 6222B-SRB WiFi/BT module
- - 1x USB 2.0 Host and 1x USB 3.0 Host ports
- - HDMI port
- - S/PDIF Tx
- - IR receiver
- - AXP805 PMIC
- - 5V/2A DC power supply
