D-Link DI-524 rev A2
D-Link DI-524 A2
Availability: EoL
Manuf (OEM/ODM): Cameo WLG-2206
FCC approval date: 12 January 2005
Country of manuf.: China
Type: wireless router
FCC ID: KA2DI524A2, NHPWLG2206
Power: 5 VDC, 2.5 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800BBTC-70)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond W986432DH-6)
Expansion IFs: none specified
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell 88W8010
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA
ETH chip1: Marvell 88W8510
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
| FCC ID | |
|---|---|
| Cameo WLG-2206 | NHPWLG2206 |
| Encore ENHWI-G | NHPWLG2206 |
| TRENDnet TEW-432BRP B1.0R | NHPWLG2206 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| D-Link DI-524 rev A1 | Marvell | Marvell | Marvell |
| D-Link DI-524 rev A2 | Marvell | Marvell | Marvell |
| D-Link DI-524 rev B2 | AMRISC | AMRISC | Ralink |
| D-Link DI-524 rev B4 | RDC | RDC | Ralink |
| D-Link DI-524 rev C1 | Atheros | Atheros | Atheros |
| D-Link DI-524 rev D1 | Atheros | Atheros | |
| D-Link DI-524 rev E1 | Atheros | Atheros | |
| D-Link DI-524 rev G1 | AMRISC | AMRISC | Airoha |
| D-Link DI-524 rev G2 | D-Link | D-Link | Airoha |
| D-Link DI-524 rev H1 | Ralink | Ralink | |
| D-Link DI-524 rev I1 | Ralink | Ralink | |
| D-Link DI-524SU rev E8 | Broadcom | Broadcom | |
| D-Link DI-524UP | Realtek | Realtek | Realtek |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
This device is a Cameo WLG-2206 / Global Sun WL RT 2454 NM2.
The FCC ID printed on the label is KA2DI524A2, but it has been
- assigned the Cameo FCC ID (NHPWLG2206) in this entry.
The board is marked with "WL RT 2454 NM2 B10 VER:V1-0" in the FCC photos.
- TRENDnet TEW432BRP rev Bx.x version 1.2.0.0019 firmware works the best.
- You will have to make some small edits to the firmware file in order to load.
