Thomson TG585v7

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Thomson TG585 v7

FCC approval date: 03 January 2008
Country of manuf.: China

Type: wireless router, dsl modem

FCC ID: RSE-TG585V7
US: TMBDL01BTG585V7

Power: 22 VDC, 0.41 A
Connector type: barrel

CPU1: Broadcom BCM6338 (240 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Spansion S29GL032N90TFI04)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Elpida DS1216AGTA-75-E)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM4318
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL

ETH chip1: Broadcom BCM6338
Switch: Broadcom BCM5325E
LAN speed: 100M
LAN ports: 4

bg

Stock bootloader: CFE 1.0.37 6.5.17

Stock FW OS: Linux 2.6.32.9

Flags: ADSL2+

Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 4 are Thomson devices

802dot11 OUI: none specified

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Technicolor product page

Wikis

Forum threads

The user mentioned no working ethernet or wifi.
.. however the switch might be supported according to:
openwrt-devel mailing list
Wi-Fi should be supported by b43
"BCM4318 chipset: AP mode does not work because of packet loss
in high transmission rates. Hard to debug & fix." (solved? [from here])

Serial

copied from ali1234's post on the above OpenWrt forums

 • OpenWrt boot log
CFE version 1.0.37-6.5.17 for BCM96338 (32bit,SP,BE)
Copyright (C) 2000-2005 Broadcom Corporation.

Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MB, id 0x2200, size 4096KB
error on Ethernet Switch setup
Failed initializing enet hardware
CPU type 0x29010: 240MHz
Total memory: 16777216 bytes (16MB)

Total memory used by CFE:  0x80401000 - 0x805283F0 (1209328)
Initialized Data:          0x8041D7F0 - 0x8041FA50 (8800)
BSS Area:                  0x8041FA50 - 0x804263F0 (27040)
Local Heap:                0x804263F0 - 0x805263F0 (1048576)
Stack Area:                0x805263F0 - 0x805283F0 (8192)
Text (code) segment:       0x80401000 - 0x8041D7E8 (116712)
Boot area (physical):      0x00529000 - 0x00569000
Relocation Factor:         I:00000000 - D:00000000

Board IP address                  : 192.168.1.1  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 3  
Board Id Name                     : 96338W  
Psi size in KB                    : 24
Number of MAC Addresses (1-32)    : 2  
Base MAC Address                  : 00:11:22:33:44:55  
Ethernet PHY Type                 : External Switch Using Reverse MII
Memory size in MB                 : 16
CMT Thread Number                 : 0
Dying Gasp Enable (0:Disable 1:Enable)  : 0

Could not activate network interface 'eth0': CFE error -1
*** Press Enter to stop auto run (3 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x80010000
Decompression OK!
Entry at 0x80010000
Starting program at 0x80010000
Linux version 2.6.32.9 (nico@desktop-de-nico) (gcc version 4.3.3 (GCC) ) 
#2 Tue Mar 23 07:32:51 CET 2010
Detected Broadcom 0x6338 CPU revision a2
CPU frequency is 240 MHz
16MB of RAM installed
registering 8 GPIOs
board_bcm963xx: CFE version: 1.0.37-6.5
bootconsole [early0] enabled
CPU revision is: 00029010 (Broadcom BCM6338)
board_bcm963xx: board name: 96338W
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00001000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00001000
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,
jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
Memory: 13304k/16384k available (2134k kernel code, 
3080k reserved, 459k data, 136k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Calibrating delay loop... 238.59 BogoMIPS (lpj=477184)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.236:1): initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
msgmni has been set to 25
io scheduler noop registered
io scheduler deadline registered (default)
gpiodev: gpio device registered with major 254
gpiodev: gpio platform device registered with access mask FFFFFFFF
bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
bcm963xx_flash: 0x00400000 at 0x1fc00000
bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
bcm963xx_flash: Read Signature value of CFE1CFE1
bcm963xx_flash: CFE bootloader detected
bcm963xx_flash: CFE boot tag found with version 6, board type 6338W, and tagid bccfe.
bcm963xx_flash: Partition 0 is CFE offset 80c78a20 and length 0
bcm963xx_flash: Partition 1 is kernel offset c7e and length 0
bcm963xx_flash: Partition 2 is rootfs offset cbf and length 0
bcm963xx_flash: Partition 3 is nvram offset d00 and length 0
bcm963xx_flash: Partition 4 is linux offset d40 and length 0
bcm963xx_flash: Spare partition is 2b0000 offset and length 140000
Creating 5 MTD partitions on "bcm963xx":
0x000000000000-0x000000010000 : "CFE"
0x000000010100-0x0000000f0000 : "kernel"
mtd: partition "kernel" must either start or end on erase block boundary 
or be smaller than an erase block -- forcing read-only
0x0000000f0000-0x0000003f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=2B0000, len=140000 
0x0000002b0000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "nvram"
0x000000010000-0x0000003f0000 : "linux"
bcm63xx_wdt started, timer margin: 30 sec
Registered led device: adsl
Registered led device: ses
Registered led device: ppp-fail
Registered led device: power
Registered led device: stop
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press f<ENTER> to enter failsafe mode
- regular preinit -
switching to jffs2
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
- init -

Please press Enter to activate this console. eth0: 
link forced UP - 100/full - flow control off/off
Generic kernel compatibility enabled based on linux-next next-20100113
cfg80211: Calling CRDA to update world regulatory domain
roboswitch: Probing device eth0: Failed to enable switch
roboswitch: Probing device eth1: No such device
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (210 buckets, 840 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

BusyBox v1.15.3 (2010-03-19 06:01:56 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 BackFire (10.3-rc1, r20254) -----------------------
  * 1/3 shot Kahlua    In a shot glass, layer Kahlua 
  * 1/3 shot Bailey's  on the bottom, then Bailey's, 
  * 1/3 shot Vodka     then Vodka.
 ---------------------------------------------------
root@OpenWrt:/#

Images